GV2ME14 Telemecanique MANUAL STARTER 600VAC 10Amp IEC

Telemecanique / Schneider GV2ME14 MANUAL STARTER / Motor Circuit Breaker / Motor Protector 600VAC 10Amp IEC GV2 ME14

Condition: New. Original brand new product in a factory box.

Click to see more items from Redrive Inc.

Features

• The GV2 and GV3 devices are 3-pole, horsepower-rated manual starters. They include a manual disconnect, Class 10 ambient-compensated, bi-metallic thermal overload relay, and an instantaneous magnetic trip mechanism in one compact unit.

• Either starter can be used alone for local, manual control of a single motor or can be wired in front of a contactor to provide a complete, remotely operated motor control circuit. The GV2 and GV3 are particularly effective when multiple motor circuits are to be housed in one panel.

• The GV2 and GV3 devices are UL Listed for group installations for motors with individual full-load currents up to 63 A. If each motor in a grouping is controlled by a GV2 or GV3 device, only one branch circuit protective device (circuit breaker or fusing) is necessary for the entire group. The table below specifies the maximum allowable size of the branch protector for each manual starter, in accordance with National Electrical Code Article 430-53.

• The interrupting rating for group installations is 10 kA at 480 V for the GV2M and 50 kA at 480 V for both the GV2P and GV3M devices. The instantaneous trip is set at 13 times the thermal trip setting and is not adjustable.

• The GV2M and the GV3M manual starters feature pushbutton control to indicate the ON or OFF state of the device. The GV2P features a rotary handle which indicates the ON or OFF state and also whether the unit has been tripped by overload, short-circuit, undervoltage, or shunt trip. All devices are now available with spring terminal clamps. Add "3" to the end of the catalog number.

Documentation available

Specification: